Nacházíte se: Domů » Terminologická databáze » ČSN EN ISO 1891-2 - basis metal

ČSN EN ISO 1891-2 - Spojovací součásti - Terminologie - Část 2: Termíny a definice povrchových úprav

Stáhnout normu:

ČSN EN ISO 1891-2 (Zobrazit podrobnosti)

Změny:

Změna A1 | Datum vydání/vložení: 2021-12-01

Datum vydání/vložení:

2016-08-01

Zdroj:

https://www.iso.org/obp/ui/#iso:std:iso:1891:-2:ed-1:v1:en,fr,ru,other

Třidící znak:

021003

Obor:

Šrouby, matice, podložky. Část obecná

ICS:

01.040.21 - Mechanické systémy a součástky pro obecné použití (názvosloví)
21.060.01 - Spojovací součásti obecně

Stav:

Platná

3.1.1 finish coating
3.1.2 as processed
3.2 Coatings for fasteners
3.2.1 electroplated coating
3.2.2 zinc flake coating
3.2.3 hot dip galvanized coating
3.2.4 phosphate coating
3.2.5 mechanically applied coating
3.2.6 chemically applied coating
3.2.7 zinc thermal diffusion coating
3.2.8 sherardization coating
3.2.9 electrophoretic coating
3.2.10 temporary protection
3.3 Coating systems
3.3.1 coating system
3.3.2 basis metal
3.3.3 substrate
3.3.4 base coat
3.3.5 top coat
3.3.6 sealant
3.3.7 conversion coating
3.3.8 chromate conversion coating
3.3.9 hexavalent chromium Cr(VI)
3.3.10 trivalent chromium Cr(III)
3.3.11 passivation layer
3.3.12 self-passivation
3.3.13 passivation of stainless steel
3.3.14 lubricant
3.4 Pre and post coating process steps
3.4.1 pre-treatment
3.4.2 chemical cleaning
3.4.3 mechanical cleaning
3.4.4 degreasing
3.4.5 pickling
3.4.6 drying
3.4.7 curing
3.4.8 curing duration
3.4.9 hydrogen embrittlement
3.4.10 internal hydrogen embrittlement
3.4.11 baking
3.4.12 baking duration
3.4.13 environmental hydrogen embrittlement
3.4.14 hydrogen induced stress corrosion cracking
3.5 Coating process
3.5.1 bulk coating
3.5.2 rack coating
3.5.3 barrel coating
3.5.4 dip spin coating
3.5.5 spray coating
3.5.6 batch
3.5.7 hot dip galvanizing batch
3.5.8 small lot
3.6 Coating properties and testing
3.6.1 adhesion of coating
3.6.2 cohesion of coating
3.6.3 delamination of coating
3.6.4 ductility of coating
3.6.5 assemblability mountability
3.6.6 neutral salt spray test
3.6.7 Kesternich test
3.6.8 cyclic corrosion test
3.6.9 basis metal corrosion
3.6.10 red rust
3.6.11 coating metal corrosion
3.6.12 white corrosion
3.6.13 white haze
3.6.14 cathodic protection
3.6.15 galvanic corrosion
3.6.16 passivity for stainless steel
3.6.17 dry-to-touch
3.6.18 total thickness
3.6.19 reference thickness
3.6.20 local thickness
3.6.21 minimum local thickness
3.6.22 average thickness
3.6.23 reference area
3.6.24 significant surface
3.6.25 coating weight
3.7 Miscellaneous
3.7.1 fastener manufacturer
3.7.2 chemical supplier
3.7.3 coater
3.7.4 distributor
3.7.5 alteration coating distributor
3.7.6 outdoor building fastener

Terminologie normy

‹

Nahlásit chybu

3.3.2 basis metal

metal of the fastener on which the coating is applied

3.3.2 podkladový kov

kov spojovací součásti, na který je nanášen povlak