ČSN ISO 1998-6 - Ropný průmysl - Terminologie - Část 6: Měření
| Stáhnout normu: | ČSN ISO 1998-6 (Zobrazit podrobnosti) Zákazníci, kteří mají na svém počítači sjednanou od České agentury pro standardizaci (ČAS) službu ČSN on-line pro elektronický přístup do plných textů norem v pdf (verzi pro firmy nebo pro jednotlivce), mohou zde přímo otevírat citované ČSN. |
| Datum vydání/vložení: | 2003-08-01 |
| Zdroj: | https://www.iso.org/obp/ui/#iso:std:iso:1998:-6:ed-1:v1:en |
| Třidící znak: | 656000 |
| Obor: | Ropné výrobky všeobecně a zkušební metody společné více skupinám výrobků |
| ICS: |
|
| Stav: | Platná |
- 6.10.019 calibrated volume
- 6.10.025 bottom calibration
- 6.10.032 calibration table, tank capacity table, tank table, capacity table
- 6.10.033 capacity
- 6.10.046 critical zone
- 6.10.047 critical zone height
- 6.10.049 datum point
- 6.10.050 deadwood
- 6.10.051 positive deadwood
- 6.10.052 negative deadwood
- 6.10.059 dip, innage
- 6.10.060 dip point
- 6.10.061 dipped volume
- 6.10.075 equivalent dip
- 6.10.080 floating mark
- 6.10.081 floating-roof mass
- 6.10.084 free water
- 6.10.085 free water level
- 6.10.095 gauging
- 6.10.100 gross observed volume
- 6.10.101 net observed volume
- 6.10.103 gross standard volume
- 6.10.104 net standard volume
- 6.10.112 HTG reference point
- 6.10.113 hydrostatic tank gauging
- 6.10.121 inner orientation
- 6.10.130 latitude
- 6.10.131 longitude
- 6.10.132 equator
- 6.10.140 liquid level
- 6.10.142 Littlejohn grip
- 6.10.148 longitudinal line
- 6.10.149 longitudinal plane
- 6.10.153 measurement ticket
- 6.10.154 measuring line
- 6.10.160 north pole
- 6.10.161 south pole
- 6.10.170 open capacity
- 6.10.183 pin-height
- 6.10.194 product heel mass
- 6.10.195 product heel volume
- 6.10.209 referee method of tank calibration
- 6.10.210 reference datum of high pressure tank
- 6.10.212 reference height
- 6.10.213 reference line
- 6.10.215 offset
- 6.10.216 reference plane
- 6.10.217 reference point
- 6.10.219 reference target point
- 6.10.220 tank-calibration reference temperature
- 6.10.223 relative orientation
- 6.10.252 section line
- 6.10.253 section plane
- 6.10.260 slope distance
- 6.10.269 step-over
- 6.10.270 step-over constant
- 6.10.271 step-over correction
- 6.10.272 stereoscopic model
- 6.10.273 stereoscopic photograph
- 6.10.275 strapping method
- 6.10.276 strapping tape
- 6.10.283 suspended water
- 6.10.293 target
- 6.10.294 target point
- 6.10.301 total calculated volume
- 6.10.302 total observed volume
- 6.10.304 total standard volume
- 6.10.306 total water
- 6.10.307 traverse point
- 6.10.309 ullage, outage
- 6.10.312 ullage pressure
- 6.10.313 ullage volume
- 6.10.314 ullage reference point
- 6.10.315 upper reference point
- 6.10.321 vertical line
- 6.10.329 water bottom
- 6.10.330 water cut, water dip
- 6.10.334 working method of tank calibration
- 6.10.400 clingage
- 6.10.410 on-board quantity
- 6.10.411 quantity remaining on board
- 6.10.416 liquid volume
- 6.10.417 non-liquid volume
- 6.10.433 wedge formula
- 6.10.434 wedge table
- 6.10.440 bottom sediment
- 6.10.441 suspended sediment
- 6.10.442 total sediment
- 6.20.010 metering conditions
- 6.20.040 clingage
- 6.20.050 water cut, water dip 6.20.050
- 6.20.090 base volume
- 6.20.100 proving in dynamic measurement
- 6.20.101 on-line proving
- 6.20.102 central proving
- 6.20.105 pipe prover
- 6.20.106 bi-directional prover
- 6.20.107 small volume prover
- 6.20.109 flashing
- 6.20.110 cavitation
- 6.20.115 control chart
- 6.20.116 Shewhart chart
- 6.20.117 cumulative-sum chart, cusum chart
- 6.20.119 moving average chart
- 6.20.120 control limits
- 6.20.125 Coriolis meter
- 6.20.126 direct mass meter
- 6.20.127 displacement meter
- 6.20.128 reference meter
- 6.20.130 turbine meter
- 6.20.131 vortex-shedding meter
- 6.20.135 linearity of meter
- 6.20.136 turndown ratio of a meter
- 6.20.137 indicated volume
- 6.20.138 gross volume
- 6.20.141 k-factor
- 6.20.142 meter factor
- 6.20.143 scaling factor
- 6.20.145 curve fit
- 6.20.150 cyclic distortion
- 6.20.151 intra-rotational linearity
- 6.20.155 detector of a prover
- 6.20.170 electronic head
- 6.20.180 flying start and stop
- 6.20.181 standing-start-and-stop
- 6.20.185 flow conditioning
- 6.20.186 flow conditioner
- 6.20.190 gating
- 6.20.195 aunch/receive chamber
- 6.20.205 pass
- 6.20.215 pulse interpolation
- 6.20.216 pulse interpolation divisor
- 6.20.235 round-trip volume
- 6.20.240 run
- 6.20.260 swirl
- 6.20.270 totalizer
- 6.20.285 displacer in a pipe
- 6.30.001 error
- 6.30.002 absolute error
- 6.30.003 relative error
- 6.30.004 random error
- 6.30.005 systematic error
- 6.30.006 spurious error
- 6.30.007 overall error
- 6.30.008 maximum permissible error
- 6.30.009 short-term meter error
- 6.30.010 long-term meter error
- 6.30.015 accuracy of a measuring instrument
- 6.30.016 repeatability of results of measurements
- 6.30.017 reproducibility of results of measurements
- 6.30.020 uncertainty, U ( )
- 6.30.021 random uncertainty, Ur( )
- 6.30.022 systematic uncertainty, Us( )
- 6.30.025 confidence level
- 6.30.026 confidence limits
- 6.30.027 acceptable limits
- 6.30.030 true value
- 6.30.031 conventional true value
- 6.30.032 outlier test
- 6.30.035 correlation coefficient
- 6.30.040 degrees of freedom
- 6.30.045 variance
- 6.30.050 standard deviation
- 6.30.051 experimental standard deviation
- 6.30.052 experimental standard deviation of the mean
- 6.30.053 pooled standard deviation
- 6.30.055 distribution
- 6.30.056 normal distribution
- 6.30.057 gaussian distribution
- 6.30.058 Poisson modified distribution
- 6.30.059 Student’s distribution
- 6.30.060 Student’s t
- 6.30.061 frequency distribution
- 6.30.062 skewed distribution
- 6.30.100 acceptable quality level
- 6.30.150 extrapolation
- 6.30.151 interpolation
- 6.30.152 sub-tabulation
- 6.30.160 discrimination, discrimination threshold
- 6.30.200 in transit difference
- 6.30.201 outturn quantity
- 6.30.202 outturn loss/gain
- 6.30.203 vessel-shore difference
- 6.30.210 vessel experience factor
- 6.30.211 vessel load ratio
- 6.30.212 vessel discharge ratio
- 6.30.215 volume correction factor
- 6.30.216 mass conversion factor
- 6.30.250 measurand
- 6.30.255 range
- 6.30.260 root-sum-square
- 6.30.270 traceability
- 6.30.280 argument
- 6.40.001 sample
- 6.40.005 all levels sample
- 6.40.010 top sample
- 6.40.011 upper sample
- 6.40.012 middle sample
- 6.40.013 bottom sample
- 6.40.014 lower sample
- 6.40.015 skim sample, surface sample
- 6.40.020 composite sample
- 6.40.025 spot sample
- 6.40.030 running sample
- 6.40.035 representative sample
- 6.40.040 suction-level sample
- 6.40.045 fixed rate sample, time-proportional sample
- 6.40.050 flow-proportional sample
- 6.40.060 integrity of the sample
- 6.40.065 sample conditioning
- 6.40.066 sample handling
- 6.40.070 calculated sample volume
- 6.40.071 grab
- 6.40.075 sample container
- 6.40.076 sample receiver
- 6.40.077 sample size
- 6.40.080 percent defective
- 6.40.100 sampling system
- 6.40.101 automatic sampler
- 6.40.102 automatic sampling system
- 6.40.103 sampler performance factor
- 6.40.104 sampling probe
- 6.40.105 continuous sampler
- 6.40.106 continuous sampling
- 6.40.107 intermittent sampler
- 6.40.108 stream conditioning
- 6.40.110 isokinetic sampling
- 6.40.120 sampling frequency
- 6.40.121 sampling interval
- 6.40.122 sampling location
- 6.40.123 sampling ratio
- 6.40.124 sampling line of liquefied natural gas
- 6.40.150 profile
- 6.40.151 profile average
- 6.40.152 overall mean
- 6.40.153 profile testing
- 6.40.154 point
- 6.40.155 point average
- 6.40.160 sample loop
- 6.50.010 thermowell
- 6.50.011 automatic temperature-measuring system
- 6.50.012 electrical averaging thermometer
- 6.50.013 electrical spot thermometer
- 6.50.014 resistance thermometer
- 6.50.015 temperature compensator
- 6.50.020 density meter
- 6.50.021 continuous density meter
- 6.50.022 in-line density meter
- 6.50.023 off-line density meter
- 6.50.024 on-line density meter
- 6.50.025 density transducer
- 6.50.030 servo-mechanism
- 6.50.040 apparent mass in air
- 6.50.041 gross apparent mass-in-air of oil
- 6.50.042 net apparent mass-in-air of oil
- 6.50.050 observed density
- 6.50.051 orthobaric density
- 6.50.052 gross standard density of oil
- 6.50.053 net standard density of oil
- 6.50.054 in-tank vapour density
- 6.50.060 densit pressure coefficient
- 6.50.061 density temperature coefficient
- 6.50.070 compressibility factor of gases
- 6.50.071 compressibility factor of liquids
- 6.50.075 ideal volume basis
- 6.50.076 real volume basis
- 6.50.080 gross specific energy
- 6.50.081 net specific energy
- 6.50.090 digital signal
- 6.50.095 resolution of a displaying device
- 6.60.010 reference conditions
- 6.60.011 standard reference conditions, base conditions
- 6.60.015 standard scale
- 6.60.016 reference standard
- 6.60.017 secondary standard
- 6.60.020 dry measure
- 6.60.021 wet measure
- 6.60.022 wetted area
- 6.60.023 primary measure
- 6.60.024 secondary measure
- 6.60.030 calibration, proving
- 6.60.035 drain time, draining time
- 6.60.040 water-draw
- 6.60.050 automatic pipette
- 6.60.055 proving tank
- 6.60.060 transfer standard
- 6.60.065 seraphin, fenestrated neck can
- 6.60.070 correction factor
‹
Nahlásit chybu
6.50.022 in-line density meter
density meter in which the transducer is located directly within the main line or vessel and measures continuously
NOTE No sampling system is required.
6.50.022 in-line denzitometr
měřidlo hustoty, ve kterém je převodník umístěn v hlavním potrubí nebo nádrži a měří průběžně
POZNÁMKA Není vyžadován vzorkovací systém.