Your location:
Harmonized standards and EADs - construction products »
Assignment of harmonized standards and EAD to groups of products (according to CPR, Annex IV) »
THERMAL INSULATION PRODUCTS. COMPOS...
| Sector of: | Construction products |
| Publications in the Official Journal: |
2018/C/092/6 (hEN) |
| Commission decision | 1999/91/EC , ( Construct 09/847 ) 1997/556/EC (EAD 2001/308/EC (EAD) 2000/273/EC (EAD) |
| Mandates | M/103 Změny mandátu: M/367 , M/138 , M/130 , M/137 , M/126 M/103_rev M/489 |
| Dangerous substances : |
Regulations of the Czech Republic - Dangerous substances SVHC: glass, plastics, wood, cement, adhesives Selection of potentialy dangerous substances for Group 4 (CPR): biocides, hexabromocyclododecane (HBCDD), boric acid, ammonium polyphosphate, decabromodiphenyl ether (DecaBDE), chlorinated paraffins, phenols, formaldehyde, mineral fibres, CMR categories 1A and 1B, radionuclides, pyrethroides, arsenic, chromium, lead, mercury, fluorinated hydrocarbons, hydrogenfluorocarbons (HFCs, FCs, PFCs, SF6), styrene, polychlorinated biphenyls (PCBs), bis(tributyltin)oxide
Materials for group 4 (CPR): mineral wool, fibre from the stems of hemp, slag, glass, polystyrene or its copolymer, blowing agents, phenolic foam, wood wool, sheep's wool, cement, magnesit, lime, rigid polyuretane foam PU (polyisokyanurate foam PIR, polyuretane foam PUR), reinforcement, adhesive, cork, clay, expanded perlite, natural mica, binders, additives, vermiculite Emise Environmental emissions - VOC , Environmental emissions - Watter , Environmental emissions - Soil , Radiation |
| Standard code | ČSN | Description | Applicability date | Co-existence period end date | všechny subjekty (OS/NB) oznámené v NANDO k dané normě | Assessments systems | Groups (CPR) |
|---|---|---|---|---|---|---|---|
| EN 13162:2012+A1:2015 replaces EN 13162:2012Canceled | ČSN EN 13162+A1:2016 replaces ČSN EN 13162 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made mineral wool (MW) products - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13163:2012+A1:2015 Canceled (still harmonized) is replaced EN 13163:2012+A2:2016Non harmonized | ČSN EN 13163+A1:2016Změna Z1-5.17 (zrušena)Změna Z2-8.17(Canceled (still harmonized)) is replaced ČSN EN 13163+A2:2017Non harmonized | Thermal insulation products for buildings - Factory made expanded polystyrene (EPS) productsc - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13164:2012+A1:2015 replaces EN 13164:2012Canceled | ČSN EN 13164+A1:2016 replaces ČSN EN 13164 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made extruded polystyrene foam (XPS) products - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13165:2012+A2:2016 replaces EN 13165+A1:2015Canceled | ČSN EN 13165+A2:2017 replaces ČSN EN 13165+A1:2016 Změna Z2-3.17Změna Z1-12.16 zrušenaCanceled | Thermal insulation products for buildings - Factory made rigid polyurethane foam (PU) products – Specification | 14.10.2016 (CPR) | 14.10.2017 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13166:2012+A2:2016 replaces EN 13166+A1:2015Canceled | ČSN EN 13166+A2:2017 replaces ČSN EN 13166+A1:2016 Změna Z1-12.16 zrušenaZměna Z2-3.17Canceled | Thermal insulation products for buildings - Factory made phenolic foam (PF) products - Specification | 14.10.2016 (CPR) | 14.10.2017 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13167:2012+A1:2015 replaces EN 13167:2012Canceled | ČSN EN 13167+A1:2016 replaces ČSN EN 13167 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made cellular glass (CG) products - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13168:2012+A1:2015 replaces EN 13168:2012Canceled | ČSN EN 13168+A1:2016 replaces ČSN EN 13168 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made wood wool (WW) products - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13169:2012+A1:2015 replaces EN 13169:2012Canceled | ČSN EN 13169+A1:2016 replaces ČSN EN 13169 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made expanded perlite board (EPB) products - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13170:2012+A1:2015 replaces EN 13170:2012Canceled | ČSN EN 13170+A1:2016 replaces ČSN EN 13170 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made products of expanded cork (ICB) - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 13171:2012+A1:2015 replaces EN 13171:2012Canceled | ČSN EN 13171+A1:2016 replaces ČSN EN 13171 ed. 2:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made wood fibre (WF) products - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14063-1:2004 | ČSN EN 14063-1:2005Oprava 1-5.07 | Thermal insulation materials and products - In situ formed expanded clay lightweight aggregate products (LWA) - Part 1: Specification for the loose-fill products before installation | 01.06.2005 (CPR) | 01.06.2006 (CPR) | OS/NB | 1, 3, 4 | 4 |
| AC:2006 | 01.01.2008 (CPR) | 01.01.2008 (CPR) | |||||
| EN 14064-1:2010 Canceled (still harmonized) is replaced EN 14064-1:2018Non harmonized | ČSN EN 14064-1:2010Oprava 1-11.10Změna Z2-12.2019(Canceled (still harmonized)) is replaced ČSN EN 14064-1 ed. 2:2019Non harmonized | Thermal insulation products for buildings - In-situ formed loose-fill mineral wool (MW) products - Part 1: Specification for the loose-fill products before installation | 01.12.2010 (CPR) | 01.12.2011 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14303:2009+A1:2013 Canceled (still harmonized) is replaced EN 14303:2015Non harmonized | ČSN EN 14303+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17Oprava 1-5.14(Canceled (still harmonized)) is replaced ČSN EN 14303:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14304:2009+A1:2013 Canceled (still harmonized) is replaced EN 14304:2015Non harmonized | ČSN EN 14304+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17(Canceled (still harmonized)) is replaced ČSN EN 14304:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14305:2009+A1:2013 Canceled (still harmonized) is replaced EN 14305:2015Non harmonized | ČSN EN 14305+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17(Canceled (still harmonized)) is replaced ČSN EN 14305:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made cellular glass (CG) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14306:2009+A1:2013 Canceled (still harmonized) is replaced EN 14306:2015Non harmonized | ČSN EN 14306+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17(Canceled (still harmonized)) is replaced ČSN EN 14306:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14307:2009+A1:2013 Canceled (still harmonized) is replaced EN 14307:2016Non harmonized | ČSN EN 14307+A1:2013Změna Z2-4.17Změna Z1-7.16 (zrušena)(Canceled (still harmonized)) is replaced ČSN EN 14307:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14308:2009+A1:2013 Canceled (still harmonized) is replaced EN 14308:2015Non harmonized | ČSN EN 14308+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17(Canceled (still harmonized)) is replaced ČSN EN 14308:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14309:2009+A1:2013 Canceled (still harmonized) is replaced EN 14309:2015Non harmonized | ČSN EN 14309+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17(Canceled (still harmonized)) is replaced ČSN EN 14309:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made products of expanded polystyrene (EPS) - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14313:2009+A1:2013 Canceled (still harmonized) is replaced EN 14313:2015Non harmonized | ČSN EN 14313+A1:2013Změna Z2-4.17Změna Z1-7.16 (zrušena)(Canceled (still harmonized)) is replaced ČSN EN 14313:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14314:2009+A1:2013 Canceled (still harmonized) is replaced EN 14314:2015Non harmonized | ČSN EN 14314+A1:2013Změna Z1-7.16 (zrušena)Změna Z2-4.17(Canceled (still harmonized)) is replaced ČSN EN 14314:2017Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made phenolic foam (PF) products - Specification | 01.11.2013 (CPR) | 01.11.2013 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14315-1:2013 | ČSN EN 14315-1:2014 | Thermal insulating products for buildings - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam spray system before installation | 01.11.2013 (CPR) | 01.11.2014 (CPR) | OS/NB | 3, 4 | 4 |
| EN 14316-1:2004 | ČSN EN 14316-1:2005 | Thermal insulation products for buildings - In situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose fill products before installation | 01.06.2005 (CPR) | 01.06.2006 (CPR) | OS/NB | 3, 4 | 4 |
| EN 14317-1:2004 | ČSN EN 14317-1:2005 | Thermal insulation products for buildings - In situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose fill products before installation | 01.06.2005 (CPR) | 01.06.2006 (CPR) | OS/NB | 3, 4 | 4 |
| EN 14318-1:2013 | ČSN EN 14318-1:2014 | Thermal insulating products for buildings - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate (PIR) foam products - Part 1: Specification for the rigid foam dispensed system before installation | 01.11.2013 (CPR) | 01.11.2014 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14319-1:2013 | ČSN EN 14319-1:2014 | Thermal insulating products for building equipment and industrial installations - In-situ formed dispensed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam dispensed system before installation | 01.11.2013 (CPR) | 01.11.2014 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14320-1:2013 | ČSN EN 14320-1:2014 | Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 1: Specification for the rigid foam spray system before installation | 01.11.2013 (CPR) | 01.11.2014 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14933:2007 | ČSN EN 14933:2008 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of expanded polystyrene (EPS) - Specification | 01.07.2008 (CPR) | 01.07.2009 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 14934:2007 | ČSN EN 14934:2008 | Thermal insulation and light weight fill products for civil engineering applications - Factory made products of extruded poly-styrene foam (XPS) - Specification | 01.07.2008 (CPR) | 01.07.2009 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 15501:2013 Canceled (still harmonized) is replaced EN 15501:2015Non harmonized | ČSN EN 15501:2013Změna Z2-12.16Změna Z1-7.16 (zrušena)(Canceled (still harmonized)) is replaced ČSN EN 15501 ed. 2:2016Non harmonized | Thermal insulation products for building equipment and industrial installations - Factory made expanded perlite (EP) and exfoliated vermiculite (EV) products - Specification | 08.08.2014 (CPR) | 08.08.2015 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 15599-1:2010 | ČSN EN 15599-1:2011 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from expanded perlite (EP) products - Part 1: Specification for bonded and loose-fill products before installation | 01.04.2011 (CPR) | 01.04.2012 (CPR) | - | 1, 3, 4 | 4 |
| EN 15600-1:2010 | ČSN EN 15600-1:2011 | Thermal insulation products for building equipment and industrial installations - In-situ thermal insulation formed from exfoliated vermiculite (EV) products - Part 1: Specification for bonded and loose-fill products before installation | 01.04.2011 (CPR) | 01.04.2012 (CPR) | OS/NB | 3, 4 | 4 |
| EN 15732:2012 | ČSN EN 15732:2013 | Light weight fill and thermal insulation products for civil engineering applications (CEA) - Expanded clay lightweight aggregate products (LWA) | 01.08.2013 (CPR) | 01.08.2014 (CPR) | OS/NB | 1, 3, 4 | 4 |
| EN 16069:2012+A1:2015 replaces EN 16069:2012Canceled | ČSN EN 16069+A1:2016 replaces ČSN EN 16069:2013Změna Z2-5.16Canceled | Thermal insulation products for buildings - Factory made products of polyethylene foam (PEF) - Specification | 10.07.2015 (CPR) | 10.07.2016 (CPR) | OS/NB | 1, 3, 4 | 4 |